+886-5-2710081/82 Mon.- Fri. 09:00 - 17:00 No. 40, Dongyang New Residential Quarter, East Dist., Chiayi City 600048 , Taiwan (R.O.C.)
Certified
ISO 9001:2008
The Best
#1 IN MIDDLE EAST
Number #1
SUPPLIER IN REGION

Viscosity Grade Bitumen 20 Description

Viscosity grade of bitumens are categorized according to Viscosity (degree of fluidity) grading. The higher the grade, the stiffer the Bitumen. In Viscosity Grade, Viscosity tests are conducted at 60°C and 135°C, which represents the temperature of road surface during summer and mixing temperature respectively. The penetration at 25°C, which is annual average pavement temperature, has been also retained in Specifications.
Viscosity Grade Bitumen 20 is used for paving in cold climate & high altitude regions.

Viscosity Grade Bitumen 20 Applications

Viscosity Grade Bitumen (Asphalt) is a standard grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses and possesses characteristics and qualities unique sand quite different from other agents. They achieve very flexible and tenacious connections with other materials due mainly to viscoelastic response of bitumen, which behavior depends on how fast charges are applied. Viscosity Grade Bitumen supplied by Huei Jie Oil is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil, which practical appliance and behavior vary according to its temperature. The Bitumen supplied by Huei Jie Oil is produced from the vacuum residue (short residue) feedstock. Viscosity Grade bitumens are specified by the methods described in ASTM Standard D3381–09 and AASHTO M226-80 (2008). Viscosity Graded specifications cover bitumen (asphalt) graded by Viscosity at 60 C (140 °F).
Used in ;
linings
Soundproofing
Pipe coatings
Cable Coatings
Paints Building
Water Proofing
Tile underlying
waterproofing
Newspaper Ink

2020032416251241w3

 

VG-20 Packing

New Steel Drum, Bulk, and other packings based on the customers’ demands.

Specification of Viscosity Grade Bitumen 20

PROPERTIESSPECIFICATIONS
Absolute Viscosity, 60°C, poises, min 1600
Kinematic Viscosity, 135°C, CST, min 300
Flash point, C, min 220
Solubility in trichloroethylene, %, min 99.0
Penetration at 25°C 60-80
Softening point, C, min 45
Viscosity ratio at 60°C, max 4.0
Ductility at 25°C, cm, min, (after thin film over test) 50
Leave a Reply

Copyright © 2020 Hjoil.com.tw, All Rights Reserved