+886-5-2710081/82 Mon.- Fri. 09:00 - 17:00 60076 嘉義市大雅路一段858巷43號
Certified
ISO 9001:2008
The Best
#1 IN MIDDLE EAST
Number #1
SUPPLIER IN REGION

Description

Bitumen C170 is a paving grade bitumen manufactured to AS 2008 Table 2.2 and is suitable for standard sealing and lightly trafficked asphalt applications.

2021030510052389UW

Applications

C170 bitumen can be used for all standard spray sealing and lightly trafficked asphalt applications.

Asphalt recommendations

  Mixing Temperature   Holding time at Mixing Temperature   Medium term storage temperature   Medium term storage time Maximum safe handling temperature
  140-165°C   14 days   130-150°C   30 days 175°C

Sealing recommendations

  Spraying Temperature Holding time at spraying temperature   Medium term storage temperature   Medium term storage time   Minimum pavement temperature
  170-180°C   7 days   130-150°C   30 days 15°C

During sealing operations, it is normal practice to add cutter oil to the bitumen to reduce binder viscosity to a level at which effective wetting and adhesion of the cover aggregate can take place. The quantity of cutter oil added to the bitumen depends upon the pavement temperature, the daily traffic and the nominal size of the cover aggregate. Basic cutting practice for Viva Bitumen C170 bitumen should be as follows:

Parts cutter per 100 parts bitumen measured at 15°C

Pavement Temperature (°C) Traffic (veh/lane/day) Nominal Aggregate Size: 10mm or greater Nominal Aggregate Size: 7mm or less
  15 to 20 low (<100) med (100 – 1500) high (>1500) 7-8 5-6 4 7-10 6-8 5-6
  20 to 25 low med high 7-8 5-6 4 7-10 6-8 5-6
  26 to 35 low med high 4-6 2-4 2-3 6-8 5-7 4-6
  >36   all   0-2   0-3

Health & safety

HJ OIL  Bitumen C170 is unlikely to present any significant health or safety hazard when properly used in the recommended application where good standards of industrial practice are maintained. Further guidance on Product Health and Safety is available on the relevant Material Safety Data Sheet.

Typical characteristics

Description Units Methods Typical
Viscosity at 60° C Pa.s AS 2341.2 170
Viscosity at 135° C Pa.s   AS 2341.2 0.35
Pen at 25° C dmm AS 2341.12 min 62
Flashpoint ° C AS 2341.14 min 250
Viscosity of residue at 60° C (% of original)   Pa.s   AS 2341.2   max 300
Leave a Reply

Copyright © 2020 Hjoil.com.tw, All Rights Reserved