+886-5-2710081/82 Mon.- Fri. 09:00 - 17:00 60076 嘉義市大雅路一段858巷43號
ISO 9001:2008
The Best
Number #1

Bitumen Penetration grade 85/100 Description

Bitumen Penetration Grade 85/100 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by Huei Jie Oil Company is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by Huei Jie Oil Co. This bitumen is produced through aeration on vacuum bottom (the raw material used for making bitumen left in vacuum distillation column in oil refineries) in bitumen production units. Its penetration grade ( the measure of bitumen hardness) is between 85 to 100.

Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.

The Bitumen mode is dependent on temperature. The temperature-vs-stiffness relationship of bitumen is dependent on the type of crude oil and its refining method. Bitumen penetration grade 85/100 is semi hard penetration grade bitumen used as a paving grade bitumen which is suitable for road construction and repair. It is also used for the production of asphalt pavements with the below technical specification. This grade of bitumen is mainly used in the manufacturing of hot mix asphalt for bases and wearing courses. Bitumen 85/100 is one of the most used bitumen grades and it’s a basic material for all other bituminous products.

Penetration determines the hardness of bitumen by measuring the depth to which a standard loaded the needle will vertically penetrate in 5 seconds, in a sample of bitumen maintained at a temperature of 25 degrees Celsius.



Bitumen grade 85/100 Applications

Bitumen 85/100 is suitable for road construction and for the asphalt pavements with superior properties. This type of bitumen used in the manufacture of hot mix asphalt for bases and wearing courses and the main usage of this product is used in the spaying and chip application. The bitumen is provided during the presses of oxidation of vacuum bottom in bitumen production units. Due to its relatively low air blowing and penetration, It is used in areas with cold weather for asphalting and insulation. It is not cracked in low temperatures.

Guaranty and safety of bitumen 85/100

Huei Jie Oil Company guaranty the quality of bitumen penetration grade 85/100 with the arrangement of the international inspectors to check quality and quantity of the bitumen penetration grade 85/100 during the loading to the vessel and controlling the production by QC by batch test report before shipping. RABIT Company guarantees the quality to meet with ASTM.

Bitumen Penetration grade 85/100 Specifications

Bitumen 85/100 Test method Unit Specification
Specific gravity @ 25°c ASTM D70 Kg/cm3 1.01/1.06
Penetration @ 25°c ASTM D5 mm/10 85/100
Softening point °c ASTM D36 °C 41/49
Ductility @25 °c ASTM D113 Cm 100 min
Loss on heating(wt) % ASTM D6 wt % 0.2 max
Drop in penetration after heating % ASTM D5-D6 % 20 max
Flash point c ASTM D92 °C 250 min
Solubility is CS2(wt) % ASTM D4 wt % 99.5 min
Spot test A.A.S.H.O.T102   Negative
Leave a Reply

Copyright © 2020 Hjoil.com.tw, All Rights Reserved